Directions For Use

What is MONKEYPOX IGG/IGM TEST KIT ?

The LYHER IgG/IgM test kit for the Monkeypox is a diagnostic test. The test is to be used as an aid in the rapid diagnosis of infection with Monkeypox. The test is used for the direct and qualitative detection of IgG/IgM of Monkeypox in human whole blood, serum, plasma. The

rapid test uses highly sensitive antigen to measure the virus infection. A negative result of the LYHER Monkeypox IgG/IgM Test Kit does not exclude infection with Monkeypox virus. If symptoms are suggestive of Monkeypox, a negative result should be verified by another laboratory test.

TEST PROCEDURE

1、Bring the specimen and test components to room temperature if refrigerated or frozen.Once thawed, mix the specimen well prior to performing the assay. When ready to test,Tear open the aluminum bag at the notch and remove the Test Cassette. Place the test Cassette on a clean, flat surface.
2、Fill the plastic dropper with the specimen. Holding the dropper vertically, dispense 1 drop of serum/plasma (about 30-45 μL) or 1 drop of whole blood (about 40-50 μL) into the sample well, making sure there are no air bubbles.
3、Immediately add 1 drop (about 35-50 μL) of sample diluent with the buffer tube positioned vertically. Set the timer for 15 MINUTES.
4、Read the result after 15 MINUTES in sufficient lighting condition. The test result can be read at 15 MINUTES after adding the sample to the test cassette. The result after 20 minutes is invalid.

INTERPRETATION

1、Bring the specimen and test components to room temperature if refrigerated or frozen.Once thawed, mix the specimen well prior to performing the assay. When ready to test,Tear open the aluminum bag at the notch and remove the Test Cassette. Place the test Cassette on a clean, flat surface.
2、Fill the plastic dropper with the specimen. Holding the dropper vertically, dispense 1 drop of serum/plasma (about 30-45 μL) or 1 drop of whole blood (about 40-50 μL) into the sample well, making sure there are no air bubbles.
3、Immediately add 1 drop (about 35-50 μL) of sample diluent with the buffer tube positioned vertically. Set the timer for 15 MINUTES.
4、Read the result after 15 MINUTES in sufficient lighting condition. The test result can be read at 15 MINUTES after adding the sample to the test cassette. The result after 20 minutes is invalid.